Brand Conveyor Components
Model TA
Item # TA-5
Quantity

Overview

The Model TA Belt Alignment Switch, aka Conveyor Belt Drift Switch, for a belt conveyor is part of CCC’s Conveyor Safety System™ product line. This misalignment switch is a safety and monitoring control that indicates when a conveyor belt has drifted, ie, wandered off-center to a dangerous condition. The switch can be wired for both an alarm signal and a conveyor system shutdown. The TA Switch saves the time, money, and labor required to replace a damaged conveyor belt. Designed to be installed in pairs for full belt coverage on both sides.
 
NEED TO KNOW
No less than four alignment controls should be installed on each conveyor, one on each side of the belt near the head and tail pulleys. For longer conveyors, we recommend an additional pair every 250'-300'.

Specifications

Product Type Belt Alignment Control
Enclosure Material 319 Cast Aluminum
Mount Config 3 Holes @ 13/32" (Surface Mount)
Switch Type 2 DP/DT
Contact Type Dry Contact
Elect Connect 3/4" NPT
Ambient Temp < 104°F
Contact Rating 15A @ 125V or 250 VAC; 3/4 HP 125 VAC; 1-1/2 HP 250 VAC
Enclosure - Housing Rating UL: NEMA Type 3S, 4, 4X, 5; CSA: NEMA Type 3S, 4, 4X

Downloads

  • TA-5 Technical Data

  • Model TA Operator Manual

  • Model TA Belt Alignment Control Brochure

  • Conveyor Components Co Catalog

Need technical assistance?
Talk with an AIRMATIC Expert now.

Call Me

Enter your phone number here and an AIRMATIC representative will call you.