+1.215.333.5600
SHOP NOW

Binmaster PROCAP II-3A Standard 3-A/USDA Capacitance Probe

Brand Binmaster
Series PROCAP II
Model PROCAP II-3A
Item # 730-0523
Quantity

Overview

The PROCAP I and II standard capacitance probes detect the presence or absence of material in contact with the probe by esnsing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air.

Specifications

Power Requirement 115/230 VAC 50/60 Hz, 2.2VA
Probe Type 250°F DELRIN
Enclosure Die Cast Aluminum Threaded Cover; FDA Recognized Powder Coat Finish
Output Relay DPDT 10 Amp at 250 VAC
Calibration Type "Quick Set" Coarse / Fine Single Turn Potentiometers
Pressure 200 PSI
Fail-Safe Switch Selectable High / Low
Time Delay Dual Delay Covered / Uncovered up to 30-Seconds
Mount Connection 1" or 2" Sanitary 315 SS Fitting
Sensitivity Setting Adjustable Sensitivity to <1 Picofarad
Ambient Operating Temp -40°F to 158°F
Approvals Class II, Groups E, F, & G Hazardous Locations; Enclosure Type NEMA 4X, 5, 9, & 12
PRO-Shield Compensates f/ Material Build-Up on Sensing Probe
Conduit Entry 3/4" NPT
Status Indicator Visual LED Indicates Sensor Status: Uncovered, Covered, and Power Failure
Probe Variations All DELRIN Sleeved Style Probes

Downloads

  • PROCAP II Series Operator Manual

  • PROCAP I HD & PROCAP II HD Brochure

  • BINMASTER Capacitance Probe Brochure

  • BINMASTER Catalog

  • PROCAP Capacitance Probes & Vibrating Rods Application Data Sheet

Need technical assistance?
Talk with an AIRMATIC Expert now.

Chat Now
Call Us
Request A Quote

Call Me

Enter your phone number here and an AIRMATIC representative will call you.